Best Track Saw for Precise Cuts

This circular saw is hard to Ignore with evolutions 40-inch track included. Power and precision at the forefront of its design, The R185CCSX ensures accuracy and reliability to get the job done faster, smoother and safer than ever before.

The Kreg Adaptive Cutting System Saw and Guide Track Kit provides guided cutting for always straight and smooth cuts. An excellent tool combination for cutting solid wood and sheet goods, it provides unparalleled control with a cutting capacity up to 50". Conveniently, the 62" Guide Track stays in place without clams, while the Plunge saw cuts up to 2 1/8" deep at 90 degree and 1 1/2" at 45 degree. Safety is ensured with built-in features that protect against binding and kickback, so you can cut with confidence.

Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. Try the TS 75 once, and you will never look back.

The DEWALT DCS520T1 60V max* 6-1/2" (165mm) cordless TrackSaw kit offers cordless convenience with the power of a corded tool! This is a zero clearance TrackSaw(TM) cutting system that delivers straight, splinter-free, precise cuts. For use with TrackSaw(TM) dual edged tracks for perfectly straight cuts in both directions. A Brushless motor effortlessly powers through hardwoods up to 2-1/8" Thick. On-track cut depth; 2-1/8" @90 degrees and 1-5/8" @ 45 degrees; depth of cut scale accurately accounts for thickness of track. It has a continuous anti-kickback mechanism and riving knife which prevent kickback when engaged. This saw also features a straight plunge mechanism for optimal ergonomics, with an enclosed low profile guard gives a 90% dust extraction capability. Specifications: blade diameter = 6-1/2", No load speed = 1750-4000 RPM, bevel capacity = 47 degrees, max cut at 90° = 2-1/8 in., max cut at 45° = 1-5/8 in. Kit includes: 1) DCS520 6-1/2" (165mm) TrackSaw, 1) DCB606 60V max* flexible 6.0Ah battery, 1) blade, 1) blade Change wrench, 1) DEWALT T-Stack kit box.

Remember when your saw stayed on the right track? Keep your cuts on the straight and narrow with the WEN 10-Amp Sidewinder Plunge Cut Track Saw. The WEN Track Saw provides users the same results as a table or panel saw in a compact and portable package. Simply lay the track (not included – model CT9502) along the desired surface for a clean and smooth cut. The WEN Track Saw is the perfect companion for ripping plywood, trimming doors, building furniture, and any other application needing long, precise cuts. Our powerful 10-amp motor rotates the 6-1/2 inch blade up to 5500 times per minute, letting you power through even the hardest of woods. Bevel the saw 45 degrees to the left to create angled cuts in boards up to 1-5/8 inches thick. Set the depth gauge anywhere from 0 to 2-1/3 inches to control how deep the saw plunges. The 12 x 6-5/8 inch base features precision grooves that let the saw glide smoothly along the track. However, the saw can also exist on its own as a plunge saw, relying on its flat base for maximum stability and precision. Easily switch between three different blade settings: one for scoring cuts that go 1/8-inch deep, one for full plunge cuts, and one to simplify blade changes. The non-slip base cams reduce pinching and minimizes kickback. The back-mounted dust port allows for attachment to your favorite dust collection system to control sawdust and limit cleanup. Simply attach your dust collection device of choice and start sawing. Compatible with the WEN CT9502 100-Inch Track and the WEN CT992F Track Saw Clamps. And, because it’s a WEN product, your WEN 10-Amp Plunge Cut Circular Track Saw comes backed by a two-year warranty, a nationwide network of skilled service technicians, and a friendly customer helpline, all to make sure you remember WEN.

The Bosch GKT13-225 Track Saw with Plunge Action delivers precision and power, ideal for making table-saw quality cuts to wood and wood-based sheet goods such as laminated particle boards and plywood. The track-guidance system provides exact adjustments for precision end-to-end cuts and plunge cuts. The saw and track combination makes it a more easily transportable alternative to a table saw. The precision of the track saw and blade combine with the optional Bosch tracks (sold separately) to deliver a straight fast finish cuts. The saw is engineered to fit precisely to the tracks. The saw includes constant electronics to help maintain speed under load. The saw also features a spindle lock, a swiveling hose port and a lock-off mechanism. It features overload protection. It has a single pivot point for both bevel and non-bevel cuts, from -1° (for slight undercuts) to +47° cuts. It allows for efficient dust extraction when connected to a suitable vacuum cleaner. The GKT13-225L Kit includes a 48-tooth 6-1/2 In. track saw blade, blade-change wrench, and an L-Box case. Bosch offers a full range of optional attachments, including four different track lengths, connector for connecting multiple tracks, an angle guide and a rip fence.

Get precise, accurate cutting and a splinter-free mirror finish, without the table saw. Makita's SP6000K 6-1/2-Inch Plunge Circular Saw delivers smooth, straight cuts. When you combine it with an optional guide rail system, constructed with anodized aluminum, the saw and rail system work together to produce accurate cuts with minimal tear-out. The saw combines a powerful 12 amp motor and a large cutting capacity with magnesium components for less weight and electronic speed control to maintain constant speed under load for smooth cutting and a splinter-free mirror finish. The SP6000K is a more portable option to a table saw and is ideal for use on the jobsite or in the shop

The TS req is not your standard Circular saw. With its accuracy and versatility, a better comparison would be to the most advanced Table saws, Miter saws or panel saws available. Add in its incredible portability and unbelievable ease of use, and you have a precision-cutting solution like No other, at home in the highest-end cabinet shop as well as an Onsite remodel. With the addition of Micro-Adjustable depth controls and a Flat housing for flush-cutting against walls or adjacent surfaces, the TS 55 req is our most advanced plunge cut saw ever, which is saying a lot.

Get precise, accurate cutting and a splinter-free mirror finish, without the table saw. Makita's SP6000K 6-1/2-Inch Plunge Circular Saw delivers smooth, straight cuts. When you combine it with an optional guide rail system, constructed with anodized aluminum, the saw and rail system work together to produce accurate cuts with minimal tear-out. The saw combines a powerful 12 amp motor and a large cutting capacity with magnesium components for less weight and electronic speed control to maintain constant speed under load for smooth cutting and a splinter-free mirror finish. The SP6000K is a more portable option to a table saw and is ideal for use on the jobsite or in the shop. Includes 55 inch guide rail. Do not expose power tools to rain or wet conditions. Ideal for cutting large wood panels and other wood materials in confined areas.

The DEWALT DCS520ST1 60V MAX* 6-1/2" (165mm) Cordless Track Saw Kit, with 59" Track features a brushless motor to easily power through hardwoods up to 2-1/8" thick. Features straight plunge mechanism for optimal ergonomics. For use with zero clearance TrackSaw cutting system to deliver precise, straight, splinter-free cuts - and TrackSaw dual edged tracks for perfectly straight cuts in both directions. On track cut depth: 2 1/8" (54mm) at 90 degree, 1-5/8" (41mm) at 45 degree, depth scale accurately indicates exact depth of cut accounting for track thickness. This saw has a continuous anti-kickback mechanism and riving knife to prevent kickback when engaged, along with a straight plunge mechanism for optimal ergonomics. Universal 1-1/4" dust port for 90% efficient dust collection with vacuum. Bevel Capacity 47 degrees, Max cut at 45 degrees 1-5/8", Max cut at 90 degrees 2-1/8", No Load speed 1,750-4,000 RPM, Blade diameter 6-1/2". This is part of the FLEXVOLT battery system; the power of corded, the freedom of cordless. Backed by Dewalt's 3 year limited warranty. Includes: 1) DCS520 60V 6 1/2" Track Saw, 1) DCB606 60V Battery, 1) DCB118 Charger, 1) DEWALT T-Stack Box, 1) DEWALT 6 1/2" 42T FLEXVOLT Blade, 1) DWS5022 59" Track.

When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts. Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback. Use the FS 1400 Guide Rail (55 inches) with the Festool TS Plunge cut saw to make precision cuts up to 49 inches long Integrated splinterguard serves as cut line and prevents tear-out and splintering A fully integrated system, use your Festool routers or jigsaw with the guide rail for expanded capability

Parallel plunge allows the operator to maintain a smooth and constant hand position during the cutting process. A 48-tooth blade gives fine and accurate finishes with very little breakout in laminates. Rail adjustment allows the saw to be adjusted accurately to the rail. The anti-kickback function stops the saw from moving backwards along the rail and from climbing out of the work piece when making plunge cuts. Variable speed allows the correct speed to be set to match different types of materials. Padded and Stone Guard undercoated insulation over a rubber pad reduces noise while sink is in use. Full-wave electronics maintain a constant speed under heavy load. The enclosed guard gives a 90-percent dust extraction capability, while the 55 millimeter depth of cut allows for the trimming and sizing of most common door sizes. DWS520 Heavy-Duty TrackSaw 6-1/2" (20mm arbor size) 48-Tooth Ultra Fine finishing Blade Blade Wrench 59" Track 102" Track Kit Box

When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts. Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback. Use the FS 1900 Guide Rail (75 inches) with the Festool TS Plunge cut saw to make precision cuts up to 69 inches long. Integrated splinterguard serves as cut line and prevents tear-out and splintering A fully integrated system, use your Festool routers or jigsaw with the guide rail for expanded capability

Shop Fox W1835 Track Saw This is a great portable option for accurately cutting sheet goods without a table saw or panel saw. Designed to be used with the D4362 Shop Fox Guide Rail and D4363 Accessory Pack (not included), the track saw and guide rail combination is great for trimming door bottoms, making plunge cuts in the middle panels and cutting full sheets of plywood. Even when used without the guide rail, this saw is a highly accurate, and provides additional safety over traditional cutting circular saw. Motor: 120V, 9A, 1.1 kW, 5500 RPM Included Saw blade: 160mm x 20mm x 48T For optimal performance, add the optional 50" Guide Rail (D4362) and Accessory Pack (D4363) when ordering

The TTS1400 Plunge Track Saw is a highly versatile, feature packed tool with easy mode selection, fast set-up and advanced safety features. It's powerful 1400W / 12A variable speed motor has a no-load speed of 2000-5300rpm. The mode selector allows quick change between free plunge, scribe, or blade change. Blade changing is safe and easy, The power switch locks out during the blade changing process, and the blade is easily accessed through the blade guard without having to remove the cover. Soft-grip handles. Fits to guide track system for smooth, precise straight and bevel cutting and the flat design of the blade housing means the saw will work right up to the edge of the work piece - ideal for trimming doors and cutting hardwood flooring. On-board tool storage. Variable speed with soft start and constant speed electronics. Includes 6-1/2-inch (165mm) 60TCT blade. Bevel range of 0-48Degree. Requires either the TTSTP track and/or the TTST1500 track for Saw operation. Tracks sold separately.

DEWALT DWS520SK with 59-inch track kit features a DeWalt-built, 1,300 watt motor, providing enough power to cut though hardwoods, and all common woodworking and construction materials. The straight plunge mechanism enables the user to make clean, straight, and splinter-free inside (plunge) cuts. A Continuous Anti-Kick-Back feature may be engaged as well - providing additional control by only allowing the saw to move in a forward direction on the track and thus preventing kickback. The DWS520SK with 59-inch track kit combines the precision and cut-quality of a table saw, the capacity of a panel saw, and the portability of a circular saw.

Makita, a pioneer in Brushless motor technology and battery innovation, combines both in the 18V X2 LXT® (36V) Lithium-Ion Brushless 7-1/4” Circular saw kit (XSH08Z). it's powered by two 18V LXT® Lithium-Ion batteries for maximum performance, and has an electronically-controlled BL™ Brushless motor that matches torque and RPM to the application. Makita 18V X2 means freedom from the cord, even for demanding applications like cutting sheet and dimensional lumber that traditionally called for a corded saw. Best of all, users can remain in one battery platform, using the same fast-charging 18V batteries with the XSH08Z As they use across the expansive Makita 18V LXT® cordless tool system. In internal testing, The XSH08Z Made up to 610 cross-cuts per charge in 2x4 SPF lumber and up to 320 crosscuts per charge in 2x10 SPF lumber using two fully-charged 5.0Ah batteries (Sod separately). The saw has a large 2-5/8” cutting capacity at 90 degrees. The XSH08Z has a long list of features for efficient cutting without the cord. The electronically-controlled Brushless motor delivers a full 6, 000 RPM for efficient cutting, with automatic speed Change™ technology to adjust the cutting speed and torque Under load for optimum performance. The saw has a die-cast magnesium base, blade guard and blade cover. The base is compatible with optional guide rails (sold separately) for dead-on straight or bevel cutting. The compatible base means there is No need for an adapter to use with an optional guide rail. Added features include an Electric brake for maximum productivity and a built-in dust blower to clean the line-of-cut and a built-in tether notch (tether sold separately). the XSH08Z includes a 7-1/4” 24T carbide-tipped Max Efficiency Miter saw blade. The thin-kerf design provides smoother cuts with less drag on the motor and minimal material loss. Compared to standard blades The max Efficiency Miter saw blade delivers up to 70% faster cutting.

The Makita 18V X2 (36V) LXT Brushless 6-1/2” plunge Circular saw kit (XPS01Z, tool only, batteries and charger sold separately) delivers precise and more accurate cutting when combined with an optional guide rail system (sold separately). the saw and rail system work together to produce accurate cuts with minimal tear-out. The saw combines a powerful Makita-built Brushless motor powered by two 18V LXT batteries with automatic speed Change technology, which adjusts cutting speed and torque during the cut for optimum performance. The saw has a variable speed control dial (2, 500 – 6, 300 RPM), with soft start and an Electric brake for added convenience. It has a large 2-3/16” cutting capacity at 90 degrees, with a bevel capability of -1° to 48° and positive stops at 22.5° and 45°. when used with a rail system (sold separately) the plunge Circular saw is a more portable option to a Table saw for select applications, and is ideal for use on the job site or in a workshop. It's part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star protection Computer controls . Star protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and compact Lithium-Ion batteries with the Star symbol on the battery indicating Star protection inside.

Get to know the BLACK+DECKER 20V MAX* POWERCONNECT 5-1/2 in. cordless circular saw: it’s powerful, compact, and ideal for a range of DIY projects and home repairs. This circular saw is equipped with a 5-1/2 in. fast-cutting blade, as well as a bevel that detents at 45 and 90 degrees for angled cuts. Plus, you can change the blade and adjust the depth without needing extra tools. And the pivoting shoe provides enhanced control while you work. This cordless circular saw is powered by a 20V MAX* POWERCONNECT battery (not included) that’s rechargeable and compatible with other tools in the POWERCONNECT system. *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18 volts.

Traditional circular saws are bulky and unwieldy. They usually have a cord to get in the way, and if you don’t know what you’re doing, they’re hard to control. Meet the Worxsaw. This 3-3/8” Compact Circular Saw is perfect for beginner DIY-ers that are ready to step up to intermediate projects, or serious woodworkers that just want an extra, grab-n-go saw for quick rip and plunge cuts. It comes with a 1.5Ah battery and 5-hour charger, a 24T carbide-tipped blade, a hex key to switch out that blade, a vacuum adapter, and a parallel guide, so you’ve got everything you need to get going right out of the box. With a no-load speed of 2300 rpm, it can achieve the speeds of much larger saws because the thinner kerf of the 3-3/8” blade puts less strain on the motor (as compared to a full-size 7”+ blade). That also means the motor will last longer than larger saws. It’s only 4.4 lbs, so you can take it anywhere, store it anywhere. The grip with integrated safety trigger is well-balanced, for excellent control. The left-side blade design makes it so that you can see exactly where it is that you’re cutting, instead of measuring and guessing. And maybe best of all, you only need one hand to operate it. Keep the awkward full-size saw in the shop, when you need a no-muss, no-fuss circ saw on-site, grab a Worxsaw.